RSLinx Ethernet Configuration Video – YouTube

5/5 (1)

Hi everyone, we’ve posted our very first YouTube video on how to setup various Ethernet drivers using RSLinx to communicate to a ControlLogix PLC. This step-by-step RSLinx Ethernet Configuration video will show you everything you need to know to be proficient setting up RSLinx drivers. Check it out and leave some comments and let us know what you think!

If you like this and want to see more videos like it on our site check out our Mastering ControlLogix video series or on our YouTube Channel.

Site Moderator,

Fred Graham

Stratix 5700 Managed Switch – Express Setup

4/5 (2)

This topic covers the basic steps to take in order to get into the Stratix 5700 – Express Setup. Hopefully this post will save some time for others in the community. In order to enter the express setup there are a few steps to take for an out-of-the-box configuration.

  1. Make sure you ethernet port is configured for automatic IP assignment.
  2. Next power up the switch and when the “Setup” light blinks, using a paper clip press and hold the Express Setup button for approximately 4 seconds.
  3. This will illuminate a port for you to connect to to get an automatic IP address on the network. (The switch will be configured on default VLAN1000).
  4. Once online you will be presented with the Device Manager’s express setup page where you’ll be able to configure the IP address and Subnet.

If you have any problems or would like comment, please do so below.

***Update*** if you would like to view our complete step-by-step video tutorial check out Stratix 5700 Express Setup Mode or check it out on our YouTube Channel…don’t forget to subscribe!

A problem is only hard until you know how to solve it…then it's trivial!