Home › Welcome To PLCGurus.NET Live & Interactive Forum! › Live PLC Questions And Answers › General Automation Questions › Cisco Switch Express Setup Problem › Reply To: Cisco Switch Express Setup Problem
- Topics: 13
- Replies: 141
- Total Posts: 154
Well let’s start with the basics…your NIC is set for Automatic DHCP? You should be getting an IP address on the 169.254.0 network. The switch should get 169.254.0.1 on VLAN1000 and your computer should get 169.254.0.2. If it’s not getting an IP try forcing one in statically and see if you can ping the switch at this address. Also, what is the setup LED doing? Check the the image attached to see if any of these conditions are applying.