Reply To: FACTORY/PANEL BUIDER32 HMI MIGRATION

#1114

Hi Dan,

Sorry it took so long to respond…I have to make some money at my actual job too 🙂 Look at the series of images that should walk through one way to accomplish what you want. You will see in the “Connection” image that I’m using the syntax “& 15” after the tag, this is essentially the same as the masked move I showed you previously. As for the State setup, State 0 -> Value = 1, State 1 -> Value = 2, State 2 -> Value = 3, State 3 -> Value = 4. Setup it up and test it out.

Attachments:
You must be logged in to view attached files.

A problem is only hard until you know how to solve it…then it's trivial!